DRM 85-C, DRM 85
20/41
09/2007
Figure 13: CPU PCB
3.4.10 LCD removal
To remove the LCD from the Connector PCB, first follow all previous steps and then
on the Connector PCB [009] release the black latch holding the ribbon cable [012]
from the Connector PCB [009] to the LCD module [010]. Exercise extreme caution
and do not use sharp tools to remove the LCD ribbon cable – it is very delicate.
Figure 14: LCD
Then unclip the LCD [010] from the PCB [009] by moving the 4 LCD clips (shown
arrowed in fig. 15) to release the module.
Figure 15: LCD clips
LCD clips
LCD clips
LCD clips
LCD clips