![background image](http://html1.mh-extra.com/html/sennheiser/drm-85/drm-85_service-manual_1241601018.webp)
DRM 85-C, DRM 85
18/41
09/2007
Figure 9: Locking latch on AF PCB
The capsule may be removed gently from the chassis [fig. 7, 005] and the
AF board will come with it. Pay attention to the orientation of the AF board
connected to the capsule. If the capsule was already removed, the AF board may be
removed on its own by sliding down and out of the front end of the chassis.
3.4.8 Connector PCB removal
After removing the AF PCB, the connector PCB [009] can be removed. Remove
screw [015] with a T06 Torx driver being careful to retain washer [016].
Figure 10: Connector PCB
This will leave the connector board only linked via the flat ribbon cable [fig. 10,
012]. Turn the connector board over to gain access to the ribbon cable latches.
black locking latch