9
Putting the ASA 1 into operation
For rack mounting the ASA 1, you require (see Accessories and
spare parts on page 17):
the GA 3 19 rack adapter
Unscrew and remove the two recessed head screws (M4x8)
on one side of the ASA 1.
Hold one rack mount ear to the ASA 1.
Secure the rack mount ear
to the side of the ASA 1
using the two recessed head screws.
Repeat for the other rack mount ear as described above.
Secure the blanking plate
to one of the rack mount
ears
using two recessed head screws (M 6x10).
If you do
not
want to front mount the antennas:
Insert the two blanking plugs
into the holes of the
blanking plate.
When rack mounting, please note that intrinsically harmless
leakage currents of the individual mains units may
accumulate, thereby exceeding the allowable limit value. As
a remedy, ground the rack via an additional ground
connection.