8
Putting the ASA 1 into operation
Stacking several ASA 1
You can stack the ASA 1 and the receivers on top of each other.
.
Stack the devices so that the recesses of the stacking
elements completely engage with each other.
Mounting the ASA 1 into a 19 rack
Do not fit the device feet when mounting the ASA 1 into a
19 rack.
CAUTION!
Danger of injury due to toppling stacks!
High stacks can easily topple over.
Place the stack on an absolutely flat surface.
Secure the stack against toppling over.
CAUTION!
Risks when rack mounting the device!
When installing the device in a closed or multi-rack assembly,
please consider that, during operation, the ambient
temperature, the mechanical loading and the electrical
potentials will be different from those of devices which are not
mounted into a rack.
The ambient temperature within the rack must not exceed
the temperature limit specified in the specifications.
When rack mounting, take good care not to affect the
ventilation required for safe operation. If necessary, provide
additional ventilation.
Make sure that the mechanical loading of the rack is even.
When connecting to the power supply, observe the
information indicated on the type plate. Avoid circuit
overloading. If necessary, provide overcurrent protection.
