MKE 600
f
Set the battery switch
4
to
ON
to switch the internal battery on or set the
battery switch to
OFF
to switch the battery power off.
4
3
The LED
3
provides the following information:
LED
Internal battery power
lights up red for approx. 1 second
after switch-on and then goes off
switched on; operating time: up to
approx. 150 h
lights up red permanently
“Low Batt”, battery is almost empty;
approx. 8 h of remaining operating
time after initial display
flashes briefly red on switch-on
battery is empty; the microphone is
not operational
When not using the microphone for extended periods of time, remove the
battery to prevent self-discharge.
„Low Cut“ verwenden
f
Set the “Low Cut” switch
2
to the desired position.
2
Switch position Frequency response of the microphone
linear frequency response
frequencies below 100 Hz are attenuated to reduce
wind and impact noise
Summary of Contents for 505453
Page 1: ...MKE 600 Instruction manual...