background image

MKE 600

Important safety instructions

1.  Read these safety instructions and the instruction manual of the product.
2.  Keep these safety instructions and the instruction manual of the product. 

Always include all instructions when passing the product on to third parties.

3.  Only use attachments, accessories and spare parts specified by the manu-

facturer.

4.  Caution: The protective basket and pop shield must be completely dry when 

you mount them on the microphone. Moisture can cause malfunctions or 

damage to the capsule.

5.  Connect the microphone only to microphone inputs and supply units that 

provide 48 V phantom powering in accordance with IEC 61938.

6.  Do not attempt to open the product housing on your own. The warranty is 

voided for products opened by the customer.

7.  Refer all servicing to qualified service personnel. Servicing is required 

when the product has been damaged in any way, liquid has been spilled or 

objects have fallen into the product, when the product has been exposed to 

rain or moisture, does not operate normally, or has been dropped.

8.  Use the product only under the conditions of use listed in the specifications.
9.  Let the product come to ambient temperature before switching it on.
10. Do not operate the product if it was damaged during transportation.
11.  Always run cables so that no one can trip over them.
12. Keep the product and its connections away from liquids and electrically 

conductive objects that are not necessary for operating the product.

13. Do not use any solvents or aggressive cleaning agents to clean the product.
14. Caution: Very high signal levels can damage your hearing and your loud-

speakers. Reduce the volume on the connected audio devices before 

switching on the product; this will also help prevent acoustic feedback.

Intended use

The product is designed for indoor use.
It is considered improper use when the product is used for any application not 

named in the corresponding instruction manual.
Sennheiser does not accept liability for damage arising from improper use or 

misuse of this product and its attachments/accessories.
Before putting the products into operation, please observe the respective 

country-specific regulations!

Summary of Contents for 505453










Reviews: