![background image](http://html1.mh-extra.com/html/sennheiser/300-01-09/300-01-09_instruction-manual_1241546025.webp)
Using the devices
23
SK 300
The
MUTE
switch
allows you to mute the audio signal or to deactivate the RF signal. Via the
“
Mute Mode
” menu item, you can set the desired function of the
MUTE
switch
The “
Push to mute
” and “
Push to talk
” menu items are only available in conjunction with the
RMS 1 external mute switch (optional accessory).
From the “
Mute Mode
” menu item, select the desired setting (see page 28).
Exit the operating menu.
Slide the
MUTE
switch
to the left, to the position
MUTE
.
The bodypack transmitter reacts as indicated in the table.
The current state of the muting function or the RF signal is displayed on the display panel of
the bodypack transmitter. An additional display appears on the receiver’s display panel when
the pilot tone function is activated on both bodypack transmitter and receiver and, in
addition, this display has been activated via the “
Warnings
” menu item on the receiver
Setting
Slide the MUTE switch
...
Function
“
Disabled
”
... to the left (position
MUTE
)
None
“
RF On/Off
”
... to the left (position
MUTE
)
Deactivates the RF signal
(offline operation)
... to the right
Activates the RF signal
(online operation)
“
AF On/Off
”
... to the left (position
MUTE
)
Mutes the audio signal
... to the right
Unmutes the audio signal
Audio signal is muted
Transmitter’s display panel:
“
MUTE
is displayed
Receiver’s display panel:
“
TX Mute
” is displayed
*
*
only when activated on the receiver (see above)
Audio signal is activated (muting is deactivated)
Transmitter’s display panel:
“
MUTE
is not displayed
Receiver’s display panel:
“
TX Mute
” is not displayed
RF signal is deactivated
Transmitter’s display panel:
Transmission icon
is not displayed
Receiver’s display panel:
“
RF Mute
” is displayed
*
*
only when activated on the receiver (see above)
RF signal is activated
Transmitter’s display panel:
Transmission icon
is displayed
MHz
543.200
ew300 G3
MUTE
P
AF