![background image](http://html1.mh-extra.com/html/sennheiser/300-01-09/300-01-09_instruction-manual_1241546021.webp)
Using the devices
19
To switch the bodypack transmitter
off
:
If necessary, deactivate the lock mode (see page 21).
To switch the bodypack transmitter
on
and to
deactivate the RF signal on switch-on
(offline
operation):
To
activate
the
RF signal
:
Briefly press the
ON
/
OFF
button
.
The bodypack transmitter transmits an RF signal. The transmission icon
displayed.
The red
ON
LED
lights up and the standard display “
Frequency/Name
”
appears on the display panel.
You can switch the bodypack transmitter on and deactivate the RF signal on switch-
on. For more information, see below.
Press the
ON
/
OFF
button
until “
OFF
” appears on the display panel. The red
ON
LED
goes off and the display panel turns off.
When in the operating menu, pressing the
ON
/
OFF
button
will cancel your entry
(ESC function) and return you to the current standard display.
Press the
ON
/
OFF
button
until “
RF Mute On?
” appears on the display panel.
Press the
SET
button
The transmission frequency is displayed but the bodypack transmitter does not
transmit an RF signal. The transmission icon
is not displayed. When the pilot
tone function is activated on both bodypack transmitter and receiver, “
RF Mute
”
appears on the receiver’s display panel.
Use this function to save battery power or to prepare a bodypack transmitter for use
during live operation without causing interference to existing transmission links.
Briefly press the
ON
/
OFF
button
.
“
RF Mute Off
” appears on the display panel.
Press the
SET
button
The transmission icon
ON/OFF
ON/OFF
ON/OFF
SET
MHz
543.200
ew300 G3
MUTE
P
AF
ON/OFF
SET