Putting the devices into operation
15
Attaching and positioning the corresponding microphones
ME 2/ME 4
Use the microphone clip
, to attach the microphone to clothing (e.g. tie, lapel).
The ME 2 clip-on microphone (shown on the right in the diagram) has an omni-directional
pick-up pattern. It is therefore not necessary to position it precisely.
Attach the ME 2 microphone as close as possible to the sound source.
The ME 4 clip-on microphone (shown on the left in the diagram) has a cardioid pick-up
pattern.
Position the ME 4 microphone so that its sound inlet is directed towards the sound source
(e.g. mouth).
ME 3
Adjust the ME 3 headmic so that a comfortable and secure fit is ensured.
The ME 3 headmic has a cardioid pick-up pattern.
Position the microphone so that its sound inlet is directed towards the sound source
(e.g. mouth).
Attaching the bodypack transmitter to clothing
You can use the belt clip
to attach the bodypack transmitter to clothing (e.g. belt,
waist-and).
The belt clip is detachable so that you can also attach the transmitter with the antenna
pointing downwards. To do so, withdraw the belt clip
from its fixing points and attach it
the other way round. The belt clip
is secured so that it cannot slide out of its fixing points
accidentally.
To detach the belt clip:
Lift one side of the belt clip as shown in the diagram on the right-hand side.
Press down the belt clip at one fixing point and pull it out of the transmitter housing.
Repeat for the other side.
SKM 300 radio microphone
Inserting the batteries/accupack
For powering the radio microphone, you can either use two 1.5 V AA size batteries or the
rechargeable Sennheiser BA 2015 accupack.
!
CAUTION!
Danger of damage to the radio microphone!
When unscrewing the radio microphone during operation while pressing the
MIC
button
the same time, the latter can be damaged.
Do not press the MIC button
