![background image](http://html1.mh-extra.com/html/sennheiser/300-01-09/300-01-09_instruction-manual_1241546020.webp)
Using the devices
18
Switching the devices on/off
EM 300 receiver
To switch the receiver
on
:
To switch the receiver to
standby mode
:
If necessary, deactivate the lock mode (see page 21).
To
completely
switch the receiver
off
:
Disconnect the receiver from the mains by unplugging the mains unit from the wall
socket.
SK 300 bodypack transmitter
To switch the bodypack transmitter
on
(online operation):
Push the two catches
and open the battery compartment cover
.
It is vital to observe the following notes:
Make sure that the desired frequencies are listed in the enclosed frequency
information sheet.
Make sure that the desired frequencies are approved and legal in your country
and, if necessary, apply for an operating license.
200
SKM300
ew300 G3
E
MHz
Briefly press the
STANDBY
button
.
The receiver switches on and the “
Receiver Parameters
” standard display
appears.
Keep the
STANDBY
button
pressed until “
OFF
” appears on the display panel.
When in the operating menu, pressing the
STANDBY
button
will cancel your entry
(ESC function) and return you to the current standard display.