Getting started
9
Using the AQUACULTURE|CONTROL to switch outputs as a function
of sensor measurements
Which sensors, which actuators and how the cables are conneced depend strongly on your
application. In general, you can follow these steps:
1.
Mount sensors and actuator at their location.
2.
Place and lay the cables safely to the AQUACULTURE|CONTROL, remove the
protection cap from the sensor input port and connect the sensor plug to the blue
marked „SENSOR“ input.
3.
Switch on the AQUACULTURE|CONTROL and set the desired settings. To switch the
output ports, you have to assign a function to the selected output port.
Fig. 3: View from the bottom side of the AQUACULTURE|CONTROL.
Note: Changing languages can be easiliy done in the menu. Press the button MENU
and select under „System Einstellungen / Sprache“ the language „English“.
Summary of Contents for AQUACULTURE AQC-A1-333-150
Page 1: ......
