Getting started
11
4.
Optional: Connect the AQUACULTURE|CONTROL with your WLAN network (see
chapter: WLAN).
5.
Check the function of your control settings. Hint: You can easily check the actuator by
selecting the function „Constant on“.
Now, your system is ready for useage.
Controlling the drum filter with the AQUACULTURE|CONTROL
When you want to control a drum or belt filter with the AQUACULTURE|CONTROL follow the
steps below:
1.)
Water level sensor installation
If you do not have a water level sensor, please continue with 2.).
Mount the water level probe or sensor at its the optimal location. The optimal
location of the water level sensor (PS-300-MA or EPS-250-MA) is where the water
level responds to the clogging of the filter and a control over the proper functioning
of the circulation pump is. In a gravity system, this location is usually behind the filter while
in pumped systems, this is typically before the filter or in the pre-chamber of the filter.
Please do not insert the water level sensor deeper than 2.5 m and ensure that it is well fixed
and at a location with low direct currents. Read also the instructions of the water level sensor
manual.
Connect the water level sensor cable to the AQUACULTURE|CONTROL (e.g.) with SENSOR 1
(see Fig. 2). If you are using a second water level sensor, connect the 2
nd
probe with SENSOR 2.
2.)
Case switch
If your filter is equipped with a case or cover proximity switch, you can connect it to SENSOR 3.
If you do not have a suitable plug at your switch, you can order the proper plug from SENECT
or your dealer.
The function of the case switch is to switch off the drum motor and a connected UVC lamp
(which are often located inside the drum filter), when the cover is opened (mode: drum filter).
In the mode “belt filter” is selected, then only the UVC lamp is switched off.
Please consider that the case or cover switch does not fulfil all requirements to be an
emergency stop switch according to EN ISO 13850:2015-10.
Summary of Contents for AQUACULTURE AQC-A1-333-150
Page 1: ......
