Menu WLAN
67
If you also want access outside your own WLAN network (full Internet capability) with the
SENECT Control App, you must set up a DynDNS connection. This varies from router to
router, but basically the following 3 steps are necessary:
1.
Activate DynDNS account (e.g. register with MyFritz! or register and activate
DynDNS.org)
2.
Enable control with port in router (Port forwarding)
3.
Communicate port number and DynDNS address to the control via the SENECT
Control App.
Instead of port sharing, access can also be via VPN. As this differs depending on the router
used, this is described here as an example for a Fritz! box:
Activate and unlock DynDNS accounts:
1.
Enter "fritz.box" in the address bar of your browser to access the settings of your
router. Log in with your password.
2.
If you have not yet created a "MyFritz! account" with your Fritz! Box, set it up first
(Menu option
"MyFritz! account") and activate the account.
Alternatively, another DynDNS service can be activated (in the DynDNS tab).
Set up port sharing:
1.
In the Fritz! Box under the menu item “Internet”, call up the “Freigeben” submenu
and click on “Gerät für Freigaben hinzufügen”
