Senect AQC-A1-333-150-A, Manual

Page: 63 / 82

Menu WLAN
63
Menu WLAN
Further tips and assistance on the subject of WLAN networking of SENECT Control units
can be found in our wiki at
wiki.senect.de

WLAN

Info

WLAN Configuration

Start Update

Modules Update

Port number

DHCP

WLAN Reset
Submenu Info
Here you can view information about the WLAN connection of your SENECT Control unit.
SSID: WLAN network names
Signal: Strength of the connection (the strength of the connection should generally be
between -20 dB (strong) and -70 dB (weaker)). Less than -80dB is weak, below -90dB is very
bad.
IP: IP address of the control unit
MAC: Mac address of the control unit
Submenu WLAN Configuration
Note: Remote access via dynamic DNS and port sharing is only possible with
an Internet connection with IPv4 address. With DS-Lite connections, additional
devices (e.g. FIP-Box from feste-ip.net) are required to implement remote
access.
If you want to integrate your SENECT control into an existing WLAN network, you need a
Windows (7 and higher), Android or iOS-compatible terminal device on which the SENECT
Control App is installed.