6/8
COMMUNICATION PORT IDENTIFICATION
RJ45 Ethernet port (on front)
Z-KEY-wifi has an Ethernet 10/100 port with RJ45 connector on
the module front.
Micro USB port
Z-KEY-wifi has a USB connector that can be used as a
configuration port via the Easy Setup software.
Micro SD card slot
Z-KEY-WIFI has a micro SD card slot on the side of the case.
To insert the SD card in the corresponding slot, make sure the
metal contacts are facing right (as shown in the side figure).
The SD card can be of any capacity.
To activate the first configuration Access Point function, follow the following steps:
1. Press the side button of the Z-KEY-WIFI;
2. Keeping the button pressed, power the instrument;
3. Release the button after 5 seconds.
Through this procedure, the device switches to first configuration AP mode without password to enter the
parameters of the WIFI. The AP led will flash.
ACCESS POINT: FIRST CONFIGURATION
OPERATION IN ACCESS POINT MODE
In this mode, a device can function as an Access Point and accept the connection of up to 6 station devices
without the aid of an external Access Point.
This configuration can be activated from the web server.
OPERATION IN STATION MODE
In this mode, the device can connect to an existing Access Point. This function can be activated from the web
server.
Summary of Contents for Z-KEY-WIFI
Page 8: ......