User Manual
Z-SG2 / Z-SG2-L
ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION MAY
BE REPRODUCED WITHOUT PRIOR PERMISSION.
www.seneca.it
Doc: MI-005370-EN
Rev. 6
Page 22
Send:
Sends the configuration (if the dip switches ARE NOT ALL OFF the device uses the configuration of the
RS485 by dip switch and NOT the one sent by the configuration)
Test and Calibration:
Opens a new screen to read the main registers and allows you to send the commands
for the calibration of the load cell to the device.
