User Manual
Z-SG2 / Z-SG2-L
ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION MAY
BE REPRODUCED WITHOUT PRIOR PERMISSION.
www.seneca.it
Doc: MI-005370-EN
Rev. 6
Page 29
10.2.14.1.
DELTA WEIGHT
It is the maximum variation of the net weight accepted in the time defined by Delta Time.
10.2.14.2.
DELTA TIME
It is the time (in quanta of 100 ms) in which the net weight must vary less than the Delta Weight set value.
NET WEIGHING ALARM
10.2.15.
It is the threshold value in technical units (see 10.2.13
HYSTERESIS
10.2.16.
It is the hysteresis value used in the digital output mode "EXCEEDED THRESHOLD WITH HYSTERESIS" see
ANALOGUE OUTPUT TYPE
10.2.17.
The analogue output follows the value of the net weight measurement, it is possible to choose between:
10.2.17.1.
VOLTAGE
If you select the voltage analogue output, the output can vary (depending on the configuration) between 0V
and 10V.
10.2.17.2.
CURRENT
If the analogue current output is selected, the output can vary (depending on the configuration) between 0mA
and 20mA.
