MI00353-2-EN
ENGLISH 5/5
5.2 Connection for reading input current
To measure the current flowing through the cable,
plug the cable into the center hole of T201DC100
(as shown in the figure).
The maximum current that can be measured using
T201DC100 is 100A.
To increase the sensitivity of current measurement,
insert the wire several times through the center
hole T201DC100, creating a series of turns.
The
sensitivity of current measurement is proportional
to the number of turns.
Example:
Choose the end scale and wrap the wire 5 times
around the center hole obtaining 4 turns. The initial
end scale will be result 5 times smaller: the
measure proves to be more sensitive
Place the coils with symmetry in order to maintain
the sensitivity of the device.
The current direction is
shown in the figure above.
5.3 Installation on DIN rail
DIN rail
Two accessories provided for DIN rail mounting
Disposal of Electrical & Electronic Equipment (Applicable throughout the European Union and other European
countries with separate collections programs). This symbol, found on your producr or on its packaging, indicates that
this product should not be treated as household waste when you wish to dispose of it. Instead, it should be handed
over to an authorised collection point for the recycling of electrical & electronic equipment. By ensuring this product
is didposed of correctly, you will help prevent potential negative consequences to the environment and human
health, which could otherwise be caused by inappropriate disposal of this product. The recycling of materials will
help to conserve natural resources. For more detailed information about the recycling of the product, please contact
your local city office, waste disposal service of the retail store where you purchased this product.
6.0 DIP-SWITCH SETTINGS
Set the dip-swich to choose the unipolar or bipolar scale and to enable or disable the filter.
Bipolar scales
1 2 3 4 Scale
-10–10
A
-25–25
A
-10–50
A
-25–100
A
Unipolar scales
1 2 3 4 Scale
0–10
A
0–25
A
0–50
A
0–100
A
Filter
1 2 3 4 Filter
Disable
Enable
KEY
ON
