MI00353-2-EN
ENGLISH 3/5
3.2 Output and power supply
Type
Passive current loop 4 – 20 mA
Terminals
Removable screw terminal pitch 5 mm for max 2.5mm² cables
Limits
Internal fault / Over-temperature: 3,5 mA
Under-range / Over renge: 3,6 / 21,0 mA
Correct measure: 3,8 / 20,5 mA
Min. - Max. loop voltage
6 V - 28 V
Other protections
Polarity reversal
Loop current limiting on hardware fault
Over-temperature protection
Range
- Unipolar 0 – 10 A, Bipolar -10 – 0 – +10 A
- Unipolar 0 – 25 A, Bipolar -25 – 0 – +25 A
- Unipolar 0 – 50 A, Bipolar -10 – 0 – +50 A
- Unipolar 0 – 100 A, Bipolare -25 – 0 – +100 A
AC
superimposed
(f 35
Hz)
- Allowable peak value: -30 – +120 A
- Full-wave rectified: -20 – 80 A
- Half-wave rectified: -10 – 40 A
Over-voltage category
Bare conductor
CAT. III 300V
Insulated conductor
CAT. III 600V
3.4 Environmental condition
Index protection
IP20
Operating temperature
-20 °C – +70 °C
Humidity
10 – 90% a 40 °C non-condensing
Storage temperature
- 40 – +85°C
3.3 Accuracy
Maximum errors
- Input section: 0,1 % + 14 mA
- Output section: 0.05 % + 4 µA
TempCo
< 150 ppm/K
Error due to EMI
< 50 µA, test on bare wire Ø 10 mm
Response time
- Without damping filter: 100 ms
- With damping filter: 600 ms
3.5 Connections
Connections
Removable screw terminal pitch 5 mm
for loop 4 – 20 mA
Tightening torque 7.0 Lb•inch = 0.8 N•m
21 mm through hole for wire
3.6 Box
Dimension
97 x 68 x 26 mm without screw terminals
Box
PA6, Black color
