PRELIMINARY WARNINGS
The word
WARNING
preceded by the symbol indicates conditions or actions that put the user's safety at risk. The
word
ATTENTION
preceded by the symbol indicates conditions or actions that might dama
ge the instrument or the
connected equipment.
The warranty shall become null and void in the event of improper use or tampering with the module or devices supplied by
the manufacturer as necessary for its correct operation, and if the instructions contained in this manual are not followed.
WARNING
: The full content of this manual must be read before any operation. The module must only be used by
qualified electricians.
Electrical and electronic waste disposal (applicable in the European Union and other countries with recycling). The
symbol on the product or its packaging shows the product must be surrendered to a collection centre authorized to
recycle electrical and electronic waste.
The module must be repaired and damaged parts replaced by the Manufacturer. The product is sensitive to electro
-
static discharges. Take appropriate measures during any operation.
3/4
Use with:
•
Windows 10/8.1/8/7, Vista, XP
•
Windows Server 2016, 2012 R2, 2012, 2008 R2, 2008, 2003
•
Linux kernel 3.0.0-19 or later
•
Mac OS X 10.3 or later, Mac OS 9, Mac OS 8
•
Windows Mobile 6.5/5, Windows Mobile 2003SE/2003
•
Windows CE 2013, Windows CE 7.0/6.0, Windows CE 5.2-4.2
•
Compatible with standard USB port 1.0, 1.1 and 2.0.
•
Insulation between USB and RS232 or TTL or RS485: 1500 V
•
12 Vdc @ 100 mA available from terminals
•
Supply through the PC USB.
•
Baudrate: from 300 bps to 250 kbps
•
RS232 serial communication.
•
RS485 serial communication, 32 nodes maximum.
•
Possibility of multiple connection of several S117P1 units on the same PC.
•
Three LEDs to display the status of the instrument's activity.
•
RS232 connections: DB9 connector
•
TTL connections: RJ-1
0 connector
GENERAL SPECIFICATIONS
TTL (RJ10) CONNECTOR
1 2 3 4
PIN INDEX
DESCRIPTION
1
Ground
2
Rx
3
Tx
4
Power
Levels: 0 - 5 V
