INSTALLATION REGULATIONS
The module has been designed for vertical installation on a DIN 46277 rail. Avoid mounting modules over heat-gen-
erating equipment. Installation in the bottom part of the electrical panel is recommended.
Insertion in the DIN rail
As shown in figure:
1. Hook the module in the upper part of the rail.
2. Press the module down.
4/8
With regard to the S107USB instrument, there are no particular precautions to follow, except that of using a shielded
cable for the RS485 lines for long connections or connections in noisy environments (please refer to the Electrical
Connections section).
S107USB INSTALLATION REGULATIONS
K107USB INSTALLATION REGULATIONS
For long connections or in noisy environments, use a shielded cable for the RS485 line (refer to the Electrical Con-
nections section)
Removal from the rail DIN
As shown in figure:
1. Lever with a screwdriver (as shown)
2. Rotate the module upwards.
