7/8
If the installation does not start automatically, you will have to proceed manually, following the instructions given.
First of all you need to have an internet connection allowing the instrument to perform the driver update following
the automatic procedure or by connecting (http://www.ftdichip.com/Drivers/VCP.htm). For the automatic proce-
dure, configure as in Fig 3.
On the next screen proceed as follows:
At the end of the search for the driver, a screen appears that shows the update and installation have been carried
out correctly. It will therefore be possible to see the instrument among the installed USB devices and among the
serial communication ports. (COM1, COM6 etc..)
FIG. 3
FIG. 4
FIG. 5
