10-90% response :
Transmission :
Max. transmission error
:
(1)
Resolution
:
(1)
Thermal drift :
SQRT error
:
(2) (3)
Linearisation error Cylindrical
tank
:
(2)
50 Hz : max 41 ms without filter and 88 ms with filter;
60 Hz : max 35 ms without filter and 74 ms with filter.
Digital Optical
0.08% of the f.s. value for mA or 5 V output
0.07% of the f.s. value for 10 V output
1 mV for voltage output, 2 uA for current output
Lower than 120 ppm/K
in the range 1 - 100%: floating point 32 bit
0,05%
MI00096 -E
3
ENGLISH - 2/8
Insulation Voltage :
Protection Index :
Operating Conditions :
Storage Temperature :
LED Signalling :
Connections :
Conductor Section :
Wire stripping :
Standards :
Dimensions, Weight :
1,5 KV (50 Hz for 1 min )
IP20
Temperature -20 - +65 °C
Humidity 30 - 90 % at 40°C (non-condensing)
Altitudine 2000 slm
-40 - +85 °C
Input or output out-of-range limiter device triggered or
input saturation Internal fault.
.
Spring terminals
0,2 - 2,5 mm
2
8 mm
EN50081-2 (electromagnetic emission, industrial surroundings)
EN50082-2 (electromagnetic immunity, industrial surroundings)
EN61010-1 (safety)
Notes:
- Use with copper conductor.
- Use in Pollution Degree 2 Environment .
- Power Supply must be Class 2.
- When supplied by an Isolated Limited Voltage/Limited
Current power supply a fuse rated max 2.5 A shall be
installed in the field.
6,2 x 93,1 x 102,5 mm, 50 g.
Box :
PBT (black colour)
(1)
No linearisation function connected
(2)
Linearisation functions operate only in the 0..100% rated range, whereas for the
under-range and the over-range, the input signal is transferred without any alteration
(G=1). Continuity and monotonic quality of transfer guaranteed throughout the entire
range of measurement
(3)
In the 0..1% section, the curve is linear with gain G=10 in order to avoid over-
amplification of the noise in the initial section of the measurement range.