24
4.3.1 G
eneral DHCP
Server Parameter
- Trigger DHCP Service.
Select
Enable
to allow the OAP to assign
IP Addresses from IP Pool Table. Select
Disable
to prevent IP Address
assignment from the OAP
- Default Gateway.
Enter the default Gateway IP Address.
- Subnet Mask
. Configure the subnet for the client.
- Name Server 1, 2, 3.
Configure the DNS servers IP for the client.
- DHCP Start IP address.
Enter the starting IP Address for this IP Pool
Table.
- DHCP End IP address.
Enter the ending IP Address for this IP Pool
Table.
- Apply Interface.
Enable DHCP server service on Wireless or Ethernet
interface.
4.3.2 Fixed Host Entries
Figure 4-5 shows the general DHCP parameters and the fixed host entry
table. (Default fixed host entry pool is empty).
1. Click
Add
.
The Fixed Host Entry Edit page
Figure 4-6
appears.
2. To edit the Fixed Host Entry, specify the Ethernet and Internet Address
fields.
- Ethernet Address.
Enter the MAC address for a fixed IP user.
- Internet Address.
Assign a fixed IP Address to this special user.
3. Click
OK
. The Fixed Host Entry Table appears with the entries list.
4. To modify or delete a fixed host entry, click the select button beside the
entry index number and click
Modify
or
Delete
.
25
5. To add another entry to the Fixed Host Mapping Pool, repeat step 1
through step 3.
6. When you have included all the entries you need, click
FINISH .
Figure 4-6 Add Fixed Host Entry
