20
After that, click
FINISH
at the bottom of this page to complete the
modification of this page.
Wireless Router with static IP Ethernet connection
Wireless Interface Address
- IP Address.
Use this setting to assign or change the wireless interface’s
IP address.
- Subnet Mask.
Enter an IP subnet mask to identify the sub network so the
IP address can be recognized on the WLAN.
Ethernet Interface Address
- IP Address.
Use this setting to assign or change the Ethernet interface’s
IP address
- Subnet Mask.
Enter an IP subnet mask to identify the sub network so the
IP address can be recognized on the WAN.
NAPT performs on which interface?
There are three interfaces. You can select one to use or select "None"
to disable it.
Default Route IP
- IP Address.
Enter the default Gateway IP Address.
DNS Server IP
- Primary DNS Server IP.
Enter the Primary Domain Name Server IP
Address.
- Secondary DNS Server IP.
Enter the Secondary Domain Name Server
IP Address.
After that, click
FINISH
at the bottom of this page to complete the
modification of this page.
21
TCP/IP Protocol Configure
4.2.1 Virtual Server Mapping
Sometimes, the operator can expose the internal servers on the local
intranet to the public Internet. For this, you must create the Virtual Server
Mapping for these invisible internal servers.
Select the
“/General Config/ Virtual Server/”
,
and then the
General
Configuration - Virtual Server
screen appears. Figure 4-3 show the
current virtual server entry table. (
Default Virtual Server Mapping pool is
empty
)
Figure 4-3
General Configuration - Virtual Server
1. Click
Add
.
The Virtual Server Entry Edit page
Figure 4-4
appears.
2. To edit the Virtual Server Entry, specify all the entry fields to allow
Internet user to access the Internal servers.
Service Name
: Alias name of this internal server, such as FTP.
