Sencotel Premix Autofill, Operating Instructions Manual

Page: 33 / 39

-EN_7 -
A u t o f i l l
SL310010085 Ed.00 - 03_14
5.4. Electrical connection
This job may be performed only by specialized
technical personnel.
Before plugging in the machine, make sure that the main switch
is on “0”.
The Purchaser is responsible for making the electrical connection
of the Autofi ll in accordance with the manufacturer’s instructions.
Autofi ll must be connected to the mains by means of the power
supply device provided:

Connect the connector of the electric cable connected to the
Autofi ll to the connector of the output cable of the power supply
device;
Fig.5
5.3. Disposal of packing materials
After opening the box, make sure to separate the packing materi-
als according to type and dispose of them in accordance with the
current regulations in the user’s country.
We recommend keeping the box for future conveyance or trans-
port.

Connect the electric cable to the power supply device;
Fig.6

Plug the other end of the electric cable into an electric outlet.
When making the connection to the electricity mains, be
sure to abide by:
• The technical regulations and standards locally in force
at the time of installation;
• The data shown on the rating plate on the power supply
device.
Warning: the electric outlet must be situated in a place eas-
ily within reach of the user, so that no effort is re-
quired in order to disconnect the Autofi ll from the
power supply when necessary.
It is forbidden:

to use extension cords of any type;

to replace the original plug;

to use adaptors;

To use power supply devices other than the
one supplied with the Autofi ll;
• To leave the power supply device and relative connec-
tions in positions or places where they may be exposed
to splashes of water and/or other liquids; it is likewise
forbidden to immerge the power supply device in water
and/or other liquids.
Fig.7
5.5. Product connection
Autofi ll is designed to work both with rigid containers of product
and product contained in bags.
To connect the Autofi ll to the product container, use the fl exible
tube provided (the larger one) and proceed as follows:

insert the fi tting at one of the tube into the larger connector on
the rear of the Autofi ll;

connect the other end of the tube to the product container ac-
cording to the directions on the package.
Note: it is recommended to use standard, com-
mercially available adaptors to connect the con-
tainers.
Warning: make sure that the tube is free of con-
straints and has not been crushed