EN 9
EN
Revision 05/2021
Copyright © 2021, Fast ČR, a. s.
• Motion detection on/off - recording will start automatically only if there is a big
motion in the scene being shot (car movement) and stops automatically after
about 15 seconds.
• Audio recording: Off/On - The cab sound is only recorded by the built-in
microphone if Audio is on here.
• Shock sensitivity: Off/Low /Medium/High - depending on the set sensitivity
when the limit value is exceeded (shock, accident), the built-in acceleration
sensor issues a command to protect the given file against automatic deletion.
Please check the sensitivity in your application so that files are not unnecessarily
marked as locked even under normal conditions (road bumps, rail crossing, etc.).
The sensor can be also completely disabled.
• Park mode - see description below.
• LCD screensaver: Off/30 sec/1min/2min - turns off the screen after a given time
(without user control) and leaves the other operating modes unchanged to save
battery power and minimize driving interference. To turn the screen back on,
press any control button.
• Auto Power Off: Off/1min/3min/5min - auto power off after a specified time of
inactivity
• Language: please select according to your country.
• Frequency: 50Hz/60Hz -select to suppress light source flickering.
• Date/time: press OK to move between the items: YY/MM/DD.
• Format: Formats the memory card for optimal use in the camera. Use caution,
formatting will permanently delete the records. Therefore, the device asks you to
confirm the formatting, if you are sure, select YES or select Cancel to abort the
formatting.
• Time zone selection: for Central Europe select UTC + 1, in summer, select UTC +
2
• License plate watermark - you can write your text for insertion into the record
• License plate watermark Switch Off/On - determines whether or not your text
appears in the video.
• Default settings - you can restore the camera factory settings by selecting
Factory reset (confirm Yes, exit Cancel).
• Information - shows the software version info.
