EN 3
EN
Revision 05/2021
Copyright © 2021, Fast ČR, a. s.
1. Important safety instructions
Carefully read this manual before using the device. It contains important information
about safe use, operation and possible troubleshooting. Keep the user's manual in
a safe place for possible future reference. If you are planning to sell or hand the
unit over to another person, please include also the user’s manual so that the new
owner can also get acquainted to the unit.
Warning
• Protect the motor from scratching.
• Do not use force to connect the USB cable. Always make sure that the device
you are connecting the USB cable to is in the off state.
• No not insert any other connectors to the USB port than those specified for the
given port size.
• Be careful when handling the monitor to avoid damage.
• Protect the unit from shocks. Do not expose the unit to extreme temperatures,
direct sunlight etc.
• Before installation, please degrease the glass contact area, then make sure the
holder is firmly attached to prevent the camera from falling.
• Take care and do not apply force when inserting the microSD card. Before
inserting the microSD card, make sure to turn the unit off.
• As there is a wide range of microCD cards available on the market, full
compatibility with will all of them cannot be guaranteed.
• Do not expose the unit or accessories to dripping or splashing water. Protect
them from moisture, dust and dirt. Do not put any containers filled with water,
e.g. vases on the unit.
• Do not expose the unit to heat sources, such as sunshine. Do not place a naked
flame source, such a candle on or in the vicinity of the unit.
• Use only a dry cloth for cleaning. Never, under any circumstances use petrol,
thinners, ammonia or any similar substances.
