background image

7

POTENTIAL CONSEQUENCE

Risk of bodily injury from moving parts.
This air compressor cycles
automatically when the pressure
switch is in the “On/Auto” position.

Risk of injury from negligent use.

Risk of major repair.

SAFETY WARNINGS

READ ALL SAFETY WARNINGS BEFORE USING AIR COMPRESSOR

RISK FROM

NEGLIGENCE

RISK

OF AIR COMPRESSOR

DAMAGE

HAZARD

RISK FROM

 MOVING PARTS

PREVENTION

Always turn off air compressor when
not in use. Bleed pressure from the
air hose and unplug from electrical
outlet before performing
maintenance. All repairs to the air
compressor should be made by an
Authorized Service person. Never
assume the air compressor is safe
to work on just because it is not
operating. It could restart at any time!

Do not operate without protective
covers/guards. Replace damaged
covers/guards before using the air
compressor.

Never allow children or adolescents
to operate this air compressor!

Stay alert-watch what you are doing.
Do not operate the air compressor
when fatigued or under the influence
of alcohol or drugs.

Know how to stop the air
compressor. Be thoroughly familiar
with controls.

Do not operate air compressor
without an air filter.

Do not operate air compressor in a
corrosive environment.

Do not incline the air compressor
transversely or longitudinally more
than 10°.

Ensure the oil level is above the
minimum notch and below the
maximum notch on the dipstick. If
low, add compressor pump oil.

Always operate the air compressor
in a stable, secure position to prevent
air compressor from falling.

Follow all maintenance instructions
listed in this manual.

 ! SAVE THESE INSTRUCTIONS !

Summary of Contents for PC1005

















Reviews: