background image

5

SAFETY WARNINGS

READ ALL SAFETY WARNINGS BEFORE USING AIR COMPRESSOR

POTENTIAL CONSEQUENCE

Serious injury or death may occur from
normal electrical sparks in motor and
pressure switch.

Serious injury may occur if any air
compressor ventilation openings are
restricted, causing the air compressor
to overheat and start on fire.

Serious injury or death may occur from
an air tank explosion if air tanks are
not properly maintained.

Serious injury may occur from an air
compressor malfunction or exploding
accessories if incorrect system
components, attachments or
accessories are used.

HAZARD

RISK OF

EXPLOSION OR FIRE

RISK OF

BURSTING

PREVENTION

Always operate air compressor in a
well ventilated area free of
flammable vapors, combustible
dust, gases or other combustible
materials.

If spraying flammable material,
locate the air compressor at least
20 feet away from the spray area.
(An additional hose may be
required.)

Never place objects against or on
top of air compressor. Operate air
compressor at least 12 inches away
from any wall or obstruction that
would restrict proper ventilation.

Drain air tank daily or after each use
to prevent moisture buildup in the
air tank.

If air tank develops a leak, replace
the air tank immediately. Never
repair, weld or make modifications
to the air tank or its attachments.
Use only genuine SENCO® repair
parts for your air compressor.

Never make adjustments to the
factory set pressures.

Never exceed manufacturers
maximum allowable pressure rating
of attachments.

Because of extreme heat, do not
use plastic pipe or lead tin soldered
joints for a discharge line.

Never use air compressor to inflate
small, low pressure objects such as
toys.

Summary of Contents for PC1005

















Reviews: