14
【１】
Preparation of the Core Drill
●
Prepare for CEE 17 Plug and CEE 17 Connector in order to connect SIDAF80 and E type Core Drill,
then start to work as following.
1) Install CEE 17 Plug by cutting from the position of 25cm from the cord armor of E type Core Drill as
following.
2) Use as un extension cord by installing the power supply cord with PRCD which is cut above 1. into CEE
17 Connector.
【２】
Mounting to the Core Drill
1) Follow the instruction manual of the Core Drill and set the Core Drill.
WARNING
When mounting the SIDAF80, make sure to turn off the switch of the Drill Head.
2) Mount so that the Drill Head attaching section and the SIDAF80 engage.
25cm
SIDAF80
CAUTION
Regarding the usage of the Core Drill, read each instruction manual of the Core Drill.
8. HOW TO USE
CEE17 Plug
CEE17 Connector
Hook
The hole of Positioning pin
