![background image](http://html1.mh-extra.com/html/senco/isanta-sidaf80/isanta-sidaf80_operating-instructions-manual_1238119010.webp)
10
4. CONTROL PANEL
【1】
Name of Each Part of Control Panel
Clutch Button
Turn ON/OFF of the clutch.
Digital Display
When you plug the power supply code to the power supply,
「
Normal Mode
」
displays
「
CC
」
and
「
Reinforced Sensor Mode
」
displays
「
FC
」
The load setting and the load current value of the Core Drill display during drilling.
When the drill motor stops with
over
-load or the drill and the feeding are ON and the
switch of the Core Drill is OFF, drill error
「
dE
」
will be displayed.
When the feeding motor stops with
over
-load, feeding error
「
FE
」
will be displayed.
Drilling Load Setting Button
:
Increase the load for the Core Drill.
:
Decrease the load for the Core Drill.
This figure shows the initial condition of connection of the power
supply, and ● of the lamp shows the lightning.
Drill Lamp
It lights when the power supply
for the Core Drill is ON.
It lights when the Drill Motor
stops with over-load.
Drill Button
Turn ON / OFF of the power
supply for the Core Drill and
feeding also stops.
CC Lamp
It lights when
normal mode.
Clutch lamp
It lights when the clutch
operates.
FC Lamp
It lights when
reinforced sensor mode.
Feeding Lamp
It lights during the operation
of feeding.
It lights
when
it stops by
the overloading of feeding
motor.
Automatic Stop
Setting Button
Setting /
Releasing
for the
automatic stop.
Automatic Stop
Lamp
It lights during setting the
automatic stop.
It flashes when
the
auto-
matic stop is done.
Feeding Button
Turn
ON
/OFF of feeding.