3. Assemble cable jack with the base part
as illustrated in Figure 3.
4. Find a pole which is over 5 M long and
22~39 mm in diameter and connect it
with the base tube as indicated in
Figure 4.
A bamboo pole is preferred if a
metal one is used, be sure it is
isolated.
5. Put up the pole and make a loop with
the cable cord. The loop which is 15 cm
in diameter is made to prevent water
from going down into the base unit (as
figure 5).
6. The assembled outdoor antenna (as
indicated in Figure 6).
NOTE:
Figure 3
Figure 4
Figure 5
Figure 6
Pole
Tape
Loop
Washer
U-bracket
Pole
Base tube
Cable cord
connector
Ground
planes
Screw
Screw
U-bracket
Pole
Washer
Cable
13-EN
