4. Paging the desired handset which number is over 3 from the base unit
For example: Page the handset No.5 through the handset No. 2.
(1) Base unit: Press INT-COM or H2 .
(2) Handset No. 2: Press any key except to answer.
(3) Handset No. 2: Press FUNC 5 to transfer the paging and the
handset No. 5 rings for 30 seconds (P. 28).
(4) Handset No. 5: Press any key except to answer.
If the handset No. 5 dosen't answer, the paging will
be back to handset No.2 which will ring for 50
seconds (P. 28).
NOTE:
1. During paging from the base unit:
A confirmed melody sounds if the base unit receives the response
from handsets. If the melody does not sound, it means that:
(1) The handset is off.
(2) The handset is out of communication range.
(3) The handset's ring mode is set at "4" (P. 29).
2. During the intercom:
(1) Intercom can only be ended by the handset.
(2) If a bell sounds, an incoming call has been received. To answer,
press and the intercom is ended.
G. Intercom during a call
During a call, press .
The call is put on hold and the hold music is heard on line.
A warning beep sounds every 30 seconds.
To resume the call, press .
To end the intercom and hang up, press .
18-EN
