SENAO SL-2511MP, User Manual, Page: 6 / 33

4
Chapter 2 Installing Drivers & Client Utility
This chapter describes how to install the Mini-PCI Card drivers and client
under Windows 95/98/ME/2000/XP. If you want to install this Wireless Mini-PCI
Card in another device such as Wireless Access Point/Bridge/Router and
other devices equipped with a Type
Ⅲ
A slot. Make Sure these devices can
support Intersil chipset.
2-1 Installation for Windows 95/98/ME/2000/XP
During the installation, Windows 95/98/ME/2000/XP may need to copy
Windows system files from the Windows 95/98/ME/2000/XP installation
diskette or CD-ROM.Therefore you will need a copy of the Windows
installation the driver.On many syetem, instead of a CD,the necessary
installation files are archived on the hard disk in C:\Windows\OPTIONS\CABS
directory
Installation Procedures:
Before installing the new driver in your computer, you need to remove all of the
Wireless LAN Mini-PCI/PCMCIA/USB Card’s driver that you had installed in
your computer(Refer page 5). Please follow the installation procedures below.
◎
Install Wireless Mini-PCI Card Driver
1. Turn on the computer
2. Be sure that there is no Wireless LAN Mini-PCI Card has been insterted yet
3. Instert the Wireless LAN Installation CD into your CD-ROM drive.