SENAO SL-2511MP, User Manual, Page: 25 / 33

23
Chapter 3 Connecting to a Network
This chapter describes how to prepare for connection to network after install
the Mini-PCI Card drivers and utility.
The following is required for all computers if you want to connect to a network.
1.
Check Client for Microsoft Networks is installed.
2.
Check NetBEUI -> Wireless LAN Mini-PCI Card installed.
3.
Check TCP/IP -> Wireless LAN Mini-PCI Card is installed.
4.
Check file and printer sharing for Microsoft Networks.
5.
Check computer name and workgroup name.
3-1 Checking and Adding Client for Microsoft Networks
The Client for Microsoft Networks enables you to connect to other Microsoft
Windows computers and servers and use the files and printers shared on them.
If you work on Microsoft network environment, you need to set up Client for
Microsoft Networks .
1.
After finishing installing the driver & utility and rebooting the computer as
described in Chapter 2. The computer will show a dialog box titled Enter
Network Password dialog box. Enter your password if it had been set or
just click Cancel .
2.
Click Start button, select Settings and then click Control Panel to open
the Control Panel window.
3.
In the Control Panel window, double-click the Network icon to open the
Network dialog box.
4.
Select Configuration tab to check Client for Microsoft Networks is
installed as shown in Figure 3-1 . If no, click the Add button. Select Client
and click the Add button.