SENAO SL-2511MP, User Manual, Page: 18 / 33

16
z
Advanced Configuration
This item launches the Mini-PCI Card Utility with the tab Configuration that
allows users to configure Mini-PCI Cards to suit their specific network
settings.
z
WEP Encryption
This item launches the Mini-PCI Card Utility with the tab WEP Encryption
that allows users to set up the Encryption Key which is used in their network
environment.
z
SITE Survey
This item launches the Mini-PCI Card Utility with the tab Site Survey that
allows users to browser the available active access points which users can
connect to by pressing the Connect button.
z
Version Information
This item launches the Mini-PCI Card Utility with the tab About that displays
the information about driver version, utility version, and firmware version.
2. Status
State
Shows status information about the radio link, as shown in Figure 2-3-6
Figure 2-3-6
z
Associated BSSID
means the wireless client is connected to an access point. BSSID is shown in
the form of six hex digits which is the MAC address of the access point.
z
Scanning
means the wireless client is searching for an available access point in
infrastructure mode.
z
Disconnected
means there are no access points or other wireless clients (if communicating
in Ad-hoc mode), or the Mini-PCI Card is unplugged in your computer.
Current Tx Rate (Mbits/s)
The data speed that wireless client is transmitting.
Current Channel