27
Chapter 4 Troubleshooting
This chapter describes the problems and corresponding solutions that may
occur when installing a Mini-PCI Card.
Symptom
Solution
Windows does not
detect the Mini-PCI
Card when
installed.
Verify that the Mini-PCI Card is properly
inserted into the Mini-PCI Card slot.
Check whether the computer has a
Plug and Play BIOS.
Windows 95/98/ME/2000/XP might not
detect the Mini-PCI Card if a previous
installation of the Mini-PCI Card was
cancelled before it was finished.
Remove the previous driver, and redo
the installation again.
Driver fails to load
A resource conflict could exist.
For Windows 95/98/ME/2000, use the
Device Manager
to resolve resource
conflicts.
Select
System
from the
Control Panel
, then
click on the
Device Manager
tab.
Device conflict on a
Windows system
A device conflict under Windows
95/98/ME/2000/XP may be related to
the Mini-PCI Card.
For Windows 95/98/ME/2000, use the
Computer properties to identify the
used I/O port addresses and IRQ
values.
If there is a device conflict, select
alternative settings for I/O Base Address or
IRQ values. If you know which device
is conflicting with the Mini-PCI Card, you have
the option of changing that device’s I/O
address or IRQ instead of changing the
Mini-PCI Card.
Summary of Contents for SL-2511MP
