72
NFS server
or the
SYSLOG server
. If the internal memory is used to store system log data, the
log data will be cleared when the Pro Series is turned off. To preserve the system log data, set
the storage location to be SYSLOG server or NFS server. To do this, the user must configure the
corresponding media in advance. Unless the media is properly set up, the log will not be written to
a specified storage location properly.
The Pro Series can also be configured to send log data automatically if the number of logs unsent
reaches a pre-defined number. If enabled, the user must set parameters to initiate the creation of a
email. These parameters would include the number of logs required to trigger an email, the recipient’s
email address, etc.
Figure 5-2
shows the configuration and system log view screen.
Figure 5-2 System log configuration and view
5.3. Change Password
The password for the administrative system user (root) of Pro Series can be changed using this menu.
This password is required when user wants to access serial console, telnet/ssh console or Web UI of
Pro Series. (Please refer to the section 5.9 User administration for details about port user
management)
Figure 5-3 Changing the password
