19
Figure 2-14 Connecting a system console cable to the PS410
Figure 2-15 Connecting a system console cable to the PS810
2)
Connect the other end of the cable to the serial port of the user’s computer.
3)
Run a terminal emulator program (i.e. HyperTerminal). Set the serial configuration
parameters of the terminal emulation program as follows:
9600 Baud rate
Data bits 8
Parity None
Stop bits 1
No flow control
4)
Press the [ENTER] key.
5)
Enter your username and password to log into the Pro Series. The factory default user
settings are as follows.