10
Programming your timer
There are two sections for programming your timer:
Operator Mode
Technician Mode
The Operator Mode offers the accounting information as seen previously, the
settings for the currency to accept, the time a session lasts, the rate of that
time sessions, and finally the session style.
As for the Technician Mode, it allows programming parameters that are more
technical and should be access by a competent person. As a matter of fact,
accessing this section cannot be accidental. If you access this section it is
because you want to access it.
You will find on the right the flow chart allowing you to navigate through the
Operator Mode. In the following pages are the explanation of each parame-
ters and the possible choices available to you.