508.366.1488 | www.semshred.com
13
Standard Form Rotor Knife with Standard Form Bed Knife
Dimension A
: Model 3000 = 5-3/4”
Note:
If dimension A is close to minimum, a new set of knives should be ordered from Security
Engineered Machinery. Please contact our customer service.
Dimension B:
Bed knives tolerance must be held alike and parallel in sets within .010".
Dimension C:
Rotor knives tolerance must be held alike and parallel in sets within .002”.
NOTES ON KNIFE GRINDING:
After regrinding a number of times, the knives must be checked to be sure that there will be adjustment left in the
bed knives. The general rule is to place a rotor knife and bed knife back to back as shown above and measure the
total distance equal to dimension A above.
Cutting Chamber for Model 3000 3 Rotor Knives, 2 Bed Knives
