SPEC
Specifications
2-5
6C13G11
Maintenance specification
2
Power unit
Item Unit
Model
Dorado 50 EFI
Power unit
Minimum compression
pressure
(*1)
kPa
(kgf/cm
2
, psi)
960 (9.6, 139.2)
Oil pressure
(*2)
kPa
(kgf/cm
2
, psi)
125 (1.25, 18.1) at engine idle speed
Cylinder head
Warpage limit
mm (in)
0.10 (0.0039)
(lines indicate straightedge
position)
Journal inside diameter
mm (in)
37.000–37.025 (1.4567–1.4577)
Cylinders
Bore size
mm (in)
65.000–65.015 (2.5591–2.5596)
Taper limit
mm (in)
0.08 (0.0032)
Out-of-round limit
mm (in)
0.05 (0.0020)
Pistons
Piston diameter (D)
mm (in)
64.950–64.965 (2.5571–2.5577)
Measuring point (H)
mm (in)
5.0 (0.20)
Piston clearance
mm (in)
0.035–0.065 (0.0014–0.0026)
Piston pin boss bore
mm (in)
15.974–15.985 (0.6289–0.6293)
Oversize piston diameter
1st
mm (in)
65.200–65.215 (2.5669–2.5675)
2nd
mm (in)
65.450–65.465 (2.5768–2.5774)
Piston pins
Outside diameter
mm (in)
15.965–15.970 (0.6285–0.6287)
Piston rings
Top ring
Dimension B
mm (in)
1.17–1.19 (0.0461–0.0469)
Dimension T
mm (in)
2.30–2.50 (0.0905–0.0984)
End gap
mm (in)
0.15–0.30 (0.0059–0.0118)
Side clearance
mm (in)
0.02–0.06 (0.0008–0.0024)
(*1)
Measure conditions:
Ambient temperature 20 °C (68 °F), wide open throttle, with spark plugs removed from all cylinders.
The figures are for reference only.
(*2)
The figures are for reference only.
Summary of Contents for Dorado 50 EFI
