SELVA MARINE Dorado 50 EFI, Service Manual

Page: 20 / 303

GEN
INFO
General information
1-15
6C13G11
2. Check that the steering operates
smoothly.
È
Tiller handle model
É
Remote control model
3. Check that there is no interference with
wires or hoses when the outboard motor
is steered.
Checking the gear shift and throttle
operation
1. Check that the gear shift operates
smoothly when the remote control lever
or shift lever is shifted from neutral to for-
ward or reverse.
2. Check that the throttle operates smoothly
when the throttle grip (tiller handle
model) is turned from the fully closed
position to the fully open position
a
.
Check that the throttle operates smoothly
when the remote control lever (remote
control model) is shifted from forward or
reverse to the fully open position
a
.
È
Tiller handle model
É
Remote control model
Checking the power trim and tilt
system
1. Check that the outboard motor tilts up
and down smoothly when operating the
power trim and tilt unit.
2. Check that there is no abnormal noise
produced when the outboard motor is
tilted up or down.
3. Check that there is no interference with
wires or hoses when the tilted-up out-
board motor is steered.
4. Check that the trim meter points down
when the outboard motor is tilted all the
way down.
Checking the hydro tilt system
1. Check that the outboard motor tilts up
and down smoothly.
2. Fully tilt the outboard motor up, and then
lock the tilt stop lever
1
to check the lock
mechanism of the hydro tilt. Replace the
hydro tilt unit if necessary.
È
É
È
S69J1210
F
N
R
a
a
É