Selmo
Comfort technology division
“THESIS DUAL”
Electronic control for towel radiator
Rev. 05 July 2015
Selmo
Electronic
Via Pacinotti, 24 - 35030 Rubano
(PD) Italy- Tel +39.049.8976761, Fax +39.049.8976085 -
www.selmo.it
EN
DISPOSAL
This product may not be treated as ordinary household waste. It has to be
disposed in proper waste collection sites. In case of replacement it shall be
returned to the distributor.
Such an end-of-life treatment of the product will preserve the environment and
will reduce consumption of natural resources.
This symbol applied to the present product indicates the obligation to bring
it to a proper waste collection site, in order to let it be disposed according to
2002/96 / CE (RAEE - WEEE) directives.
FIL-PILOTE
(Only for product versions equipped with "Fil-Pilote")
The "Fil-Pilote" sub-function allows managing the device by a central control system that sets the
operating mode for all the connected devices.
- In “Room thermostat” operative mode:
1.
Standby:
power off the heating element, the device remains active.
2.
Comfort:
maintains the "Comfort" temperature set by the user.
3.
ECO:
maintains the room temperature 3,5°C below the "Comfort" temperature.
4.
Anti-freeze:
maintains the room temperature at 7°C.
5.
Eco-1:
maintains the room temperature 1°C below the "Comfort" temperature.
6.
Eco-2:
maintains the room temperature 2°C below the "Comfort" temperature.
- In “Towel Radiator thermostat” operative mode:
1.
Standby:
power off the heating element, the device remains active.
2.
Comfort:
maintains the "Comfort" temperature set by the user.
3.
ECO:
maintains the room temperature 10°C below the "Comfort" temperature.
4.
Anti-freeze:
maintains the room temperature at 7°C.
5.
Eco-1:
maintains the room temperature 4°C below the "Comfort" temperature.
6.
Eco-2:
maintains the room temperature 7°C below the "Comfort" temperature.
STAND-BY
I
n "Stand-by" mode the heating element is powered off.
KEY LOCK
Press together the [Select] (5) and [Mode] (6) buttons for 5 seconds to lock all the buttons (except
the [On/Stand-by] button). When key lock is activated, a “LO” indication is displayed on the screen.
To unlock the buttons, repeat the same procedure.
The manufacturer reserves the right to make any changes to the product
described in this manual, at any time, and without prior warning.
