Selmo
Comfort technology division
“THESIS DUAL”
Electronic control for towel radiator
Rev. 05 July 2015
Selmo
Electronic
Via Pacinotti, 24 - 35030 Rubano
(PD) Italy- Tel +39.049.8976761, Fax +39.049.8976085 -
www.selmo.it
EN
WARNING
Preserve with care the present instruction sheet and read carefully before using the device.
• The present device has been designed for exclusive use on a towel radiator.
• The thermostat is designed for heating the liquid contained inside a towel radiator in
combination with a heating element. Any other use is forbidden.
• Before using, carefully ensure that the line voltage is the same as that specified for
the device (see technical specifications).
• Only use heating elements compatible with the type of towel radiator being used.
• Disconnect power supply before cleaning or performing maintenance of the product.
• In case of damage of the power supply cable shut down the device and do not tamper
with it. The damaged power supply cables can be replaced exclusively by the
manufacturer or by an authorized service center. Failure to
comply w
i
th the above
rules could lead to compromised
system safety and void the warranty.
• Store and transport the heating element exclusively in the protecting packaging.
• Replacement of the heating element can be done exclusively by the product
manufacturer.
CONNECTIONS TO ELECTRIC MAINS
The available versions are the following:
• 1 Schuko plug (Class I or Class II) for direct connection.
• 3-wires for Class I models: Live (brown); Neutral (blue); Earth (green-yellow).
• 2-wires for Class II models: Live (brown), Neutral (blue).
• 3-wires for Class II models with "Fil-Pilote": Live (brown), Neutral (grey), "Fil-Pilote" (black).
RISK OF ELECTRIC SHOCK!
Disconnect power supply before proceeding with installation.
