SELMI TOP EX, User And Service Manual

Page: 36 / 55

Maintenance section
User and service manual
– TOP EX – Continuous tempering machine
34
5) Loosen with an appropriate tool (not supplied)
all fixing screws of the panel which needs to
be removed
6) Remove the screws one at a time, keeping the
panel in place until all screws are removed
7) Using both hands lift the panel out of position
and place it, preferably horizontally, on the
floor or on a level surface. Make sure that it is
not in the way and that it cannot fall or create
risks to others working in the vicinity of the
machine
The side and rear protective plates have loss-proof
screws (D) with plastic washer (E). These screws
remain attached to the plate if it is removed, preventing
loss of the fastening screws and consequent incorrect
positioning of the plate.
In order to remove the upper protective panel follow
this procedure:
1) Unplug the machine
2) Position the machine in a spacious area so as
to allow easy access
3) Put the provided anti-dust lid on the tank in
order to prevent contamination of the product
4) Identify the location of the upper panel fixing
screws (F) and unscrew them with the
appropriate tool (not supplied)
5) Lift the front side of the upper protective panel
until it hooks on the edge of the rear panel (G)
E
E
D
D
F
F
F
F
G
E