SELMI TOP EX, User And Service Manual

Page: 35 / 55

Maintenance section
User and service manual
– TOP EX – Continuous tempering machine
33
6.5. Maintenance of mechanical parts
6.5.1 Removal of the fixed lateral, rear and upper fixed
protective panels
Attention
Do not start the machine with the protective
panels removed or incorrectly screwed into
place.
Do not forget cloths, spanners or other
maintenance tools inside the machine.
In order to remove the lateral fixed protective panels
follow this procedure:
1) Unplug the machine
2) Position the machine in a spacious area so as
to allow easy access
3) Put the provided anti-dust lid on the tank in
order to prevent contamination of the product
4) Identify the location of the panel fixing screws
(A)
5) Loosen with an appropriate tool (not supplied
by) all fixing screws of the panel which needs
to be removed
6) Remove the screws one at a time, keeping the
panel in place until all screws are removed
7) Using both hands lift the panel out of position
and place it, preferably horizontally, on the
floor or on a level surface. Make sure that it is
not in the way and that it cannot fall or create
risks to others working in the vicinity of the
machine
In order to remove the rear fixed protective panel follow
this procedure:
1) Unplug the machine
2) Position the machine in a spacious area so as
to allow easy access
3) Put the provided anti-dust lid on the tank in
order to prevent contamination of the product
4) Identify the location of the rear panel fixing
screws (B)
A
A
B
B