SELMI TOP EX, User And Service Manual

Page: 32 / 55

Maintenance section
User and service manual
– TOP EX – Continuous tempering machine
30
6.4.3 Removing the screw pump
Warning
The procedure described in this section is delicate
and requires a lot of care; the manufacturer can
supply the necessary instructions to carry it out
correctly.
It is recommended to carry out this procedure
only if it is really necessary and after having
removed all the chocolate from inside the
machine.
1) Remove the rear protective panel, the lateral
protective panels and the upper protective
panel as described in section 6.5.1.
2) Place the collecting container (A) in the
dedicated hole in the bottom surface
3) Remove the screw pump knob (B)
4) Hold firmly the unlocking lever (C) of the screw
pump’s blocking plate making sure to keep the
plate in place by holding the chocolate
discharge tap (D) with the other hand.
5) Move the lever in the direction shown by the
arrow till the supporting plate’s block (E) has
been released
6) Slowly move aside the supporting plate (F)
making sure to support the screw pump
A
A
F
F
D
D
C
C
E
E
B