Table of contents
4.3
Electrical connection
First, the following must be ensured:
➢
Use an original IP69K connection cable with the correct
VA connector. (see chapter 9 Spare parts and
accessories).
Connecting the sensor:
The specified colour code corresponds to the Exner accessories.
The respective pin assignment is illustrated in the following
figures.
Fig. 6: Connector at sensor (5-pin)
M12 plug, 5-pin:
Pin Colour Designation
1
brown DC + (24 V DC)
2
white
Switching output (DOut Level)
3
blue
DC
–
(GND)
4
black
Analogue output (4-20 mA)
5
grey
Calibration (Cal. Offset)
If the analogue output is not required or not connected, the
corresponding cable must be set to "GND"
Summary of Contents for STS-15
Page 67: ......
